PIR Insulation Boards delivered to Glenrothes

Our PIR insulation boards range for Glenrothes jobs

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.

Before your Glenrothes delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Glenrothes is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• With roughly 6h 54m of daylight in Glenrothes around the shortest day, morning deliveries leave more working light for the job.

Choosing PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or the council's building standards service will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Working out quantities for your Glenrothes job

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Questions about PIR insulation boards delivery in Glenrothes

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can I add other materials to my Glenrothes delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Do you deliver PIR insulation boards to trades and homeowners in Glenrothes?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.