Insulation & Drylining
PIR Insulation Boards delivered to Cowdenbeath
PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.
Trades and homeowners in Cowdenbeath can order PIR insulation boards for delivery by sending a list, a drawing or just the sizes of the job.

PIR Insulation Boards to Cowdenbeath: the basics
- How it arrives
- Wrapped packs
- Delivering to
- Cowdenbeath, Fife
- Daylight
- About 6h 55m on the shortest day
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Dunfermline (5 mi), Rosyth (6 mi), Kirkcaldy (7 mi)
- Postcode districts
- KY4, KY5
Choosing from our PIR insulation boards range
- Cavity wall boardsBoards sized for partial-fill cavity insulation.
- Flat roof boardsBoards for warm flat roof build-ups.
- Thermal laminate boardsPIR bonded to plasterboard.
- Foil tape and fixingsTo seal joints and fix boards.
- General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
Working out quantities for your Cowdenbeath job
Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator
Delivering PIR insulation boards in Cowdenbeath
Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Cowdenbeath is inside our standard mainland delivery area.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
PIR Insulation Boards: choosing well
Fire considerations
PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.
Sealing joints
Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.
In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.
PIR Insulation Boards questions
How thick should PIR insulation be?
It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.
Do you deliver PIR insulation boards to Cowdenbeath?
Yes. We deliver across Cowdenbeath, including KY4, KY5. Cowdenbeath is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Is there a minimum order for delivery to Cowdenbeath?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
What is the foil for?
The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.
Other towns near Cowdenbeath
- PIR Insulation Boards in Dunfermline
- PIR Insulation Boards in Rosyth
- PIR Insulation Boards in Kirkcaldy
- PIR Insulation Boards in Glenrothes
- PIR Insulation Boards in Bo’ness
- PIR Insulation Boards in Edinburgh
Other materials for Cowdenbeath sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
