Order bricks for delivery in Glenrothes

Which bricks can you order in Glenrothes?

• Engineering bricks, Class A and BDense, low-absorption bricks for below DPC, inspection chambers and retaining walls.
• Special shapesBullnose, cant, coping and plinth bricks to finish sills, piers and wall tops.
• Concrete bricksConsistent concrete units in standard and coloured finishes, useful for below-ground work.
• Common bricksPlain bricks for internal or hidden walls where looks do not matter.

Estimating your bricks

Take a garden wall in Glenrothes 7 m long and 1.2 m high: 8.4 m². At 60 bricks per square metre plus 5% for cuts that is 530 bricks, roughly 2 packs of 500 depending on the maker, laid in about 0.5 tonnes of building sand and 5 bags of cement at a 1:4 mix. Try the brick calculator

Picking the right product

Matching an existing house

Bring us the brick name if you know it, or a clear photo of a cleaned face in daylight with a tape measure for scale. Size matters as much as colour: older imperial bricks are often slightly larger than 65 mm.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or the council's building standards service may specify one.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Getting bricks onto your Glenrothes site

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Glenrothes is inside our standard mainland delivery area.

• On busy streets in Glenrothes, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Questions about bricks delivery in Glenrothes

How many bricks are in a square metre?

With standard 215 × 65 mm bricks and 10 mm mortar joints you need about 60 bricks per square metre for a single-skin (half-brick) wall and about 120 for a one-brick-thick wall. Add around 5 percent for cuts and breakages.

How are bricks delivered?

In strapped packs on a flatbed lorry, normally unloaded by the lorry's crane. Tell us where the packs can go and whether there are overhead cables, low branches or soft ground.

Is there a minimum order for delivery to Glenrothes?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver bricks to a site with restricted access in Glenrothes?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.