Order PIR insulation boards for delivery in Bo’ness

Which PIR insulation boards can you order in Bo’ness?

• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.

Picking the right product

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or the council's building standards service will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Sizing your order

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Planning the drop in Bo’ness

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Bo’ness is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Ordering PIR insulation boards for Bo’ness: FAQs

Do you deliver PIR insulation boards to Bo’ness?

Yes. We deliver across Bo’ness, including EH51, EH49. Bo’ness is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can I add other materials to my Bo’ness delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.