OSB, MDF & Chipboard for sites in Tyne and Wear

OSB, MDF & Chipboard available for Tyne and Wear delivery

• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• HardboardThin sheets for protection and backing.

OSB, MDF & Chipboard delivered in Tyne and Wear towns

• OSB, MDF & Chipboard in Newcastle upon Tyne
• OSB, MDF & Chipboard in Sunderland
• OSB, MDF & Chipboard in South Shields
• OSB, MDF & Chipboard in Gateshead
• OSB, MDF & Chipboard in Washington
• OSB, MDF & Chipboard in Tynemouth
• OSB, MDF & Chipboard in Wallsend
• OSB, MDF & Chipboard in Newburn
• OSB, MDF & Chipboard in North Shields
• OSB, MDF & Chipboard in Whitley Bay
• OSB, MDF & Chipboard in Houghton-le-Spring
• OSB, MDF & Chipboard in Felling
• OSB, MDF & Chipboard in Jarrow
• OSB, MDF & Chipboard in Gosforth
• OSB, MDF & Chipboard in Hebburn

Working out quantities for your Tyne and Wear job

Decking 12 m² with 2440 × 1220 mm sheets takes 5 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 10 boards.

Delivery to Tyne and Wear: what helps

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Our standard mainland delivery area covers Tyne and Wear.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Choosing OSB, MDF and chipboard

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Your questions answered

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

Is there a minimum order for delivery to Tyne and Wear?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.

Can I add other materials to my Tyne and Wear delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.