OSB, MDF & Chipboard for Nelson, delivered to site

Choosing from our OSB, MDF and chipboard range

• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• HardboardThin sheets for protection and backing.

How delivery works in Nelson

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Nelson is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Things to check before you order

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Working out quantities for your Nelson job

Decking 12 m² with 2440 × 1220 mm sheets takes 5 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 10 boards.

Ordering OSB, MDF and chipboard for Nelson: FAQs

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.

Is there a minimum order for delivery to Nelson?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Nelson?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.