OSB, MDF & Chipboard delivery in Canvey Island

Choosing from our OSB, MDF and chipboard range

• HardboardThin sheets for protection and backing.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.

Quantities: a worked example

Decking 36 m² with 2440 × 1220 mm sheets takes 14 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 28 boards.

Getting OSB, MDF and chipboard onto your Canvey Island site

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Canvey Island is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

OSB, MDF & Chipboard: choosing well

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Ordering OSB, MDF and chipboard for Canvey Island: FAQs

Is there a minimum order for delivery to Canvey Island?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.

Do you deliver OSB, MDF and chipboard to trades and homeowners in Canvey Island?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.