CLS Studwork Timber for Canvey Island, delivered to site

What CLS timber can we deliver to Canvey Island?

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

Getting CLS timber onto your Canvey Island site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Canvey Island is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

Estimating your CLS timber

A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Choosing CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Questions about CLS timber delivery in Canvey Island

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Do you deliver CLS timber to Canvey Island?

Yes. We deliver across Canvey Island, including SS8, SS7, SS17, SS9. Canvey Island is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Canvey Island?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.