MOT Type 1 Sub-base delivery in Rutherglen

Choosing from our MOT Type 1 range

• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• ScalpingsCheaper granular fill for less demanding areas.

Delivering MOT Type 1 in Rutherglen

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Rutherglen is inside our standard mainland delivery area.

• In summer Rutherglen gets around 17h 35m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Quantities: a worked example

A 4 × 4 m area at 150 mm compacted is 2.4 m³. At about 2.1 tonnes per cubic metre plus 10% that is 5.5 tonnes, or around 7 bulk bags. Try the sub-base calculator

Before you order MOT Type 1

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

MOT Type 1 Sub-base in Rutherglen: questions

Do you deliver MOT Type 1 to trades and homeowners in Rutherglen?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How deep should a driveway sub-base be?

Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.

Is there a minimum order for delivery to Rutherglen?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.