MOT Type 1 Sub-base for Barrhead, delivered to site

Which MOT Type 1 can you order in Barrhead?

• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• ScalpingsCheaper granular fill for less demanding areas.
• HardcoreBroken masonry fill for bulking up ground.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.

How delivery works in Barrhead

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Barrhead is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

Getting the right MOT Type 1

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

Sizing your order

A 6 × 6 m area at 150 mm compacted is 5.4 m³. At about 2.1 tonnes per cubic metre plus 10% that is 12.5 tonnes, or around 15 bulk bags. Try the sub-base calculator

Your questions answered

Can you deliver MOT Type 1 to a site with restricted access in Barrhead?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver MOT Type 1 to trades and homeowners in Barrhead?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.

How deep should a driveway sub-base be?

Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.