MOT Type 1 Sub-base for Portsmouth, delivered to site

What MOT Type 1 can we deliver to Portsmouth?

• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• ScalpingsCheaper granular fill for less demanding areas.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• HardcoreBroken masonry fill for bulking up ground.

MOT Type 1 Sub-base: choosing well

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

How delivery works in Portsmouth

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Portsmouth is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Sizing your order

A 4 × 3 m area at 150 mm compacted is 1.8 m³. At about 2.1 tonnes per cubic metre plus 10% that is 4.2 tonnes, or around 5 bulk bags. Try the sub-base calculator

MOT Type 1 Sub-base questions

What is the difference between Type 1 and scalpings?

Type 1 is graded to a specification so it compacts into a strong, stable layer. Scalpings are less controlled and suit less demanding areas.

Can you deliver MOT Type 1 to a site with restricted access in Portsmouth?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Portsmouth delivery?

Yes. Put everything on one list, from MOT Type 1 to fixings and PPE, and we will price it as one delivery where the products can travel together.

How deep should a driveway sub-base be?

Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.