Cement & Aggregates
MOT Type 1 Sub-base for Ryde, delivered to site
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
We deliver MOT Type 1 to sites, driveways and yards across Ryde, from a single pallet for a small job to full loads for bigger builds.

Ryde delivery at a glance
- How it arrives
- Bulk bags or tipped loads
- Postcode districts
- PO33, PO34
- Daylight
- About 7h 57m on the shortest day
- Delivering to
- Ryde, Isle of Wight
- Delivery
- Quoted individually (ferry crossing)
- Nearby (straight line)
- Gosport (5 mi), Sandown (5 mi), Portsmouth (6 mi)
MOT Type 1 Sub-base we supply in Ryde
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
- ScalpingsCheaper granular fill for less demanding areas.
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- HardcoreBroken masonry fill for bulking up ground.
Delivery to Ryde: what helps
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Ryde needs a ferry crossing, so deliveries are quoted individually with the crossing included.
- In summer Ryde gets around 16h 30m of daylight, but early deliveries still beat the traffic and give the longest working day.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
Before you order MOT Type 1
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
How deep?
Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.
Quantities: a worked example
An 8 × 6 m area at 100 mm compacted is 4.8 m³. At about 2.1 tonnes per cubic metre plus 10% that is 11.1 tonnes, or around 14 bulk bags. Try the sub-base calculator
Ordering MOT Type 1 for Ryde: FAQs
Does Type 1 drain?
Type 1 is reasonably free-draining when compacted, which is one reason it is used under drives and patios.
How much MOT Type 1 do I need?
Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.
Do you deliver MOT Type 1 to Ryde?
Yes. We deliver across Ryde, including PO33, PO34. Ryde needs a ferry crossing, so deliveries are quoted individually with the crossing included. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Is there a minimum order for delivery to Ryde?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
MOT Type 1 Sub-base near Ryde
- MOT Type 1 Sub-base in Gosport
- MOT Type 1 Sub-base in Sandown
- MOT Type 1 Sub-base in Portsmouth
- MOT Type 1 Sub-base in Newport (Isle of Wight)
- MOT Type 1 Sub-base in Cowes
- MOT Type 1 Sub-base in Fareham
Other materials for Ryde sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
