Cement & Aggregates
MOT Type 1 Sub-base delivery in Kirkby-in-Ashfield
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
SK Trade is a builders' merchant delivering MOT Type 1 into Kirkby-in-Ashfield, priced to your postcode and confirmed in writing.

Your Kirkby-in-Ashfield delivery
- Nearby (straight line)
- Sutton-in-Ashfield (2 mi), Mansfield (3 mi), Hucknall (5 mi)
- Postcode districts
- NG17, NG15, NG18, NG16
- Delivery
- Standard mainland delivery
- Delivering to
- Kirkby-in-Ashfield, Nottinghamshire
- Daylight
- About 7h 32m on the shortest day
- How it arrives
- Bulk bags or tipped loads
MOT Type 1 Sub-base we supply in Kirkby-in-Ashfield
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
- ScalpingsCheaper granular fill for less demanding areas.
- HardcoreBroken masonry fill for bulking up ground.
Choosing MOT Type 1
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
How deep?
Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.
How delivery works in Kirkby-in-Ashfield
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Kirkby-in-Ashfield is inside our standard mainland delivery area.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
Sizing your order
A 4 × 3 m area at 150 mm compacted is 1.8 m³. At about 2.1 tonnes per cubic metre plus 10% that is 4.2 tonnes, or around 5 bulk bags. Try the sub-base calculator
MOT Type 1 Sub-base questions
How much MOT Type 1 do I need?
Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.
Can you tip it loose?
For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.
How soon can MOT Type 1 be delivered in Kirkby-in-Ashfield?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Can I add other materials to my Kirkby-in-Ashfield delivery?
Yes. Put everything on one list, from MOT Type 1 to fixings and PPE, and we will price it as one delivery where the products can travel together.
MOT Type 1 Sub-base in neighbouring towns
- MOT Type 1 Sub-base in Sutton-in-Ashfield
- MOT Type 1 Sub-base in Mansfield
- MOT Type 1 Sub-base in Hucknall
- MOT Type 1 Sub-base in Alfreton
- MOT Type 1 Sub-base in Heanor
- MOT Type 1 Sub-base in Ripley
Other materials for Kirkby-in-Ashfield sites
- Building & Sharp Sand in Kirkby-in-Ashfield
- PIR Insulation Boards in Kirkby-in-Ashfield
- Plasterboard in Kirkby-in-Ashfield
- Steel & Concrete Lintels in Kirkby-in-Ashfield
- OSB, MDF & Chipboard in Kirkby-in-Ashfield
- Roofing Materials in Kirkby-in-Ashfield
- Ballast & Gravel in Kirkby-in-Ashfield
- Mineral Wool Insulation in Kirkby-in-Ashfield
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
