MOT Type 1 Sub-base delivery in Hamilton

Which MOT Type 1 can you order in Hamilton?

• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• HardcoreBroken masonry fill for bulking up ground.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.

Picking the right product

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

How much will you need?

A 6 × 3 m area at 150 mm compacted is 2.7 m³. At about 2.1 tonnes per cubic metre plus 10% that is 6.2 tonnes, or around 8 bulk bags. Try the sub-base calculator

How delivery works in Hamilton

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Hamilton is inside our standard mainland delivery area.

• On busy streets in Hamilton, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

Common questions from Hamilton

Can I add other materials to my Hamilton delivery?

Yes. Put everything on one list, from MOT Type 1 to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.

Do you deliver MOT Type 1 to trades and homeowners in Hamilton?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.