Order PIR insulation boards for delivery in Congleton

Choosing from our PIR insulation boards range

• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.

Sizing your order

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Before you order PIR insulation boards

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Congleton

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Congleton is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

PIR Insulation Boards questions

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can you deliver PIR insulation boards to a site with restricted access in Congleton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver PIR insulation boards to trades and homeowners in Congleton?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.