Mineral Wool Insulation delivered to Ross-on-Wye

Our mineral wool insulation range for Ross-on-Wye jobs

• Acoustic partition rollTo cut sound through stud walls and floors.
• Cavity wall battsFull-fill batts built into new cavity walls.
• Stone wool slabsDenser slabs for fire stopping, acoustics and frame insulation.
• Timber and steel frame battsSized to fit between studs.
• Loft rolls100 to 200 mm rolls for laying between and over ceiling joists.

Delivering mineral wool insulation in Ross-on-Wye

Rolls are compressed and wrapped; they are light but take up space, so tell us if storage is tight. Ross-on-Wye is inside our standard mainland delivery area.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Working out quantities for your Ross-on-Wye job

An 8 × 6 m loft (48 m²) insulated from scratch to 270 mm needs about 6 rolls of 100 mm and 10 rolls of 170 mm, using typical roll coverage; coverage varies by brand. Try the insulation calculator

Choosing mineral wool insulation

Keep it ventilated

When insulating a loft, keep eaves vents clear so the roof space stays ventilated.

How much for a loft?

The common recommendation is 270 mm in total: usually 100 mm between the joists and 170 mm across them. Check the depth already there.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

Do I need protective gear?

Wear gloves, long sleeves and a dust mask when handling mineral wool, as it can irritate skin and eyes.

Is there a minimum order for delivery to Ross-on-Wye?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many rolls do I need for my loft?

Divide the loft floor area by the coverage printed on the roll, for each layer. Coverage varies by brand and thickness; a 100 mm roll typically covers around 8 m² and a 170 mm roll around 5 m².

Can I add other materials to my Ross-on-Wye delivery?

Yes. Put everything on one list, from mineral wool insulation to fixings and PPE, and we will price it as one delivery where the products can travel together.