Concrete & Aircrete Blocks delivered to Hove

Choosing from our concrete blocks range

• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Block paving and edgingsOn request alongside your sub-base and sand.

Estimating your concrete blocks

A single-skin block wall in Hove 9 m long and 2.7 m high is 24.3 m². At 10 blocks per square metre plus 5% you need 256 blocks, with about 0.35 tonnes of building sand and 4 bags of cement for the mortar at 1:4. Try the block calculator

How delivery works in Hove

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Hove is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Before you order concrete blocks

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Concrete & Aircrete Blocks questions

Do you deliver concrete blocks to Hove?

Yes. We deliver across Hove, including BN3, BN2, BN1, BN41. Hove is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can I add other materials to my Hove delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.