Order MOT Type 1 for delivery in Hove

MOT Type 1 Sub-base available for Hove delivery

• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• HardcoreBroken masonry fill for bulking up ground.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.

How delivery works in Hove

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Hove is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• If neighbours share the access, it helps to let them know a lorry is coming.

Things to check before you order

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Quantities: a worked example

A 10 × 3 m area at 150 mm compacted is 4.5 m³. At about 2.1 tonnes per cubic metre plus 10% that is 10.4 tonnes, or around 13 bulk bags. Try the sub-base calculator

Common questions from Hove

Can you deliver MOT Type 1 to a site with restricted access in Hove?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Does Type 1 drain?

Type 1 is reasonably free-draining when compacted, which is one reason it is used under drives and patios.

Is there a minimum order for delivery to Hove?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.