Concrete & Aircrete Blocks delivery in Brighton

Concrete & Aircrete Blocks we supply in Brighton

• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.

Getting the right concrete blocks

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Planning the drop in Brighton

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Brighton is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• On busy streets in Brighton, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

A quick quantity check

A single-skin block wall in Brighton 4 m long and 2.7 m high is 10.8 m². At 10 blocks per square metre plus 5% you need 114 blocks, with about 0.16 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Your questions answered

Is there a minimum order for delivery to Brighton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver concrete blocks to a site with restricted access in Brighton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.