Building Materials
Concrete & Aircrete Blocks delivered to Portslade
Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.
Order concrete blocks for Portslade with one message: we check the quantities, price the delivery and confirm everything before you pay.

Concrete & Aircrete Blocks to Portslade: the basics
- Postcode districts
- BN41, BN3, BN1
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 56m on the shortest day
- Delivering to
- Portslade, East Sussex
- How it arrives
- Banded pallets, usually crane offload
- Nearby (straight line)
- Hove (2 mi), Brighton (3 mi), Worthing (7 mi)
Concrete & Aircrete Blocks we supply in Portslade
- Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
- Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
- Block paving and edgingsOn request alongside your sub-base and sand.
- Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
- Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
A quick quantity check
A single-skin block wall in Portslade 8 m long and 2.4 m high is 19.2 m². At 10 blocks per square metre plus 5% you need 202 blocks, with about 0.28 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator
How delivery works in Portslade
Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Portslade is inside our standard mainland delivery area.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
Getting the right concrete blocks
Handling heavy blocks
Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.
What strength do I need?
Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Questions about concrete blocks delivery in Portslade
Do you deliver concrete blocks to trades and homeowners in Portslade?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Can you deliver concrete blocks to a site with restricted access in Portslade?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
How heavy is a concrete block?
It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.
How many blocks per square metre?
Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.
Nearby towns we deliver concrete blocks to
- Concrete & Aircrete Blocks in Hove
- Concrete & Aircrete Blocks in Brighton
- Concrete & Aircrete Blocks in Worthing
- Concrete & Aircrete Blocks in Rottingdean
- Concrete & Aircrete Blocks in Burgess Hill
- Concrete & Aircrete Blocks in Haywards Heath
Complete your Portslade order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
