Timber & Sheets
CLS Studwork Timber for Swadlincote, delivered to site
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
For jobs in Swadlincote we quote CLS timber as a delivered price to your postcode, with the vehicle and offload method agreed up front.
Swadlincote delivery at a glance
- How it arrives
- Bundles with your boards
- Nearby (straight line)
- Burton upon Trent (4 mi), Coalville (9 mi), Derby (11 mi)
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 36m on the shortest day
- Delivering to
- Swadlincote, Derbyshire
- Postcode districts
- DE11, DE15, DE12
Choosing from our CLS timber range
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- FixingsScrews, nails and frame fixings to suit.
- Noggins and head platesCut from the same stock.
Sizing your order
A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Getting CLS timber onto your Swadlincote site
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Swadlincote is inside our standard mainland delivery area.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- In summer Swadlincote gets around 16h 53m of daylight, but early deliveries still beat the traffic and give the longest working day.
- With roughly 7h 36m of daylight in Swadlincote around the shortest day, morning deliveries leave more working light for the job.
Choosing CLS timber
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Common questions from Swadlincote
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Do you deliver CLS timber to Swadlincote?
Yes. We deliver across Swadlincote, including DE11, DE15, DE12. Swadlincote is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can you deliver CLS timber to a site with restricted access in Swadlincote?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Also delivering CLS timber nearby
- CLS Studwork Timber in Burton upon Trent
- CLS Studwork Timber in Coalville
- CLS Studwork Timber in Derby
- CLS Studwork Timber in Tamworth
- CLS Studwork Timber in Lichfield
- CLS Studwork Timber in Long Eaton
More materials delivered to Swadlincote
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.