CLS Studwork Timber delivery in Burton upon Trent

Which CLS timber can you order in Burton upon Trent?

• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

Before your Burton upon Trent delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Burton upon Trent is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• On busy streets in Burton upon Trent, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Things to check before you order

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

A quick quantity check

A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Common questions from Burton upon Trent

Do you deliver CLS timber to Burton upon Trent?

Yes. We deliver across Burton upon Trent, including DE14, DE13, DE15. Burton upon Trent is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is there a minimum order for delivery to Burton upon Trent?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.