Timber & Sheets
CLS Studwork Timber delivered to Long Eaton
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Whether it is a repair, an extension or a new build in Long Eaton, we can supply the CLS timber and deliver to site.
Delivery facts for Long Eaton
- How it arrives
- Bundles with your boards
- Postcode districts
- NG10, DE72
- Nearby (straight line)
- Ilkeston (5 mi), Nottingham (6 mi), West Bridgford (6 mi)
- Daylight
- About 7h 35m on the shortest day
- Delivery
- Standard mainland delivery
- Delivering to
- Long Eaton, Derbyshire
What CLS timber can we deliver to Long Eaton?
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
Planning the drop in Long Eaton
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Long Eaton is inside our standard mainland delivery area.
- On busy streets in Long Eaton, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
CLS Studwork Timber: choosing well
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
How much will you need?
A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
CLS Studwork Timber questions
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Do you deliver CLS timber to Long Eaton?
Yes. We deliver across Long Eaton, including NG10, DE72. Long Eaton is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Is there a minimum order for delivery to Long Eaton?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Close to Long Eaton
- CLS Studwork Timber in Ilkeston
- CLS Studwork Timber in Nottingham
- CLS Studwork Timber in West Bridgford
- CLS Studwork Timber in Heanor
- CLS Studwork Timber in Derby
- CLS Studwork Timber in Arnold
Other materials for Long Eaton sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.