Timber & Sheets
Order CLS timber for delivery in Stranraer
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Stranraer, from a single pallet for a small job to full loads for bigger builds.

Delivery facts for Stranraer
- Delivery
- Standard mainland delivery
- Delivering to
- Stranraer (Dumfries and Galloway)
- Postcode districts
- DG9
- How it arrives
- Bundles with your boards
- Daylight
- About 7h 11m on the shortest day
- Nearby (straight line)
- Bangor (Down) (31 mi), Carrickfergus (34 mi), Newtownards (34 mi)
CLS Studwork Timber we supply in Stranraer
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- Noggins and head platesCut from the same stock.
Sizing your order
A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
How delivery works in Stranraer
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Stranraer is inside our standard mainland delivery area.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- In summer Stranraer gets around 17h 21m of daylight, but early deliveries still beat the traffic and give the longest working day.
CLS Studwork Timber: choosing well
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Ordering CLS timber for Stranraer: FAQs
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Can you deliver CLS timber to a site with restricted access in Stranraer?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Is there a minimum order for delivery to Stranraer?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Close to Stranraer
- CLS Studwork Timber in Bangor (Down)
- CLS Studwork Timber in Carrickfergus
- CLS Studwork Timber in Newtownards
- CLS Studwork Timber in Holywood
- CLS Studwork Timber in Newtownabbey
- CLS Studwork Timber in Belfast
More from SK Trade in Stranraer
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
