CLS Studwork Timber for Oxford, delivered to site

CLS Studwork Timber we supply in Oxford

• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.

Working out quantities for your Oxford job

A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Getting CLS timber onto your Oxford site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Oxford is inside our standard mainland delivery area.

• Give us the full postcode for the drop point; deliveries around OX1 are priced to the exact address.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Your questions answered

Is there a minimum order for delivery to Oxford?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Do you deliver CLS timber to trades and homeowners in Oxford?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.