SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivered to Northampton

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

SK Trade is a builders' merchant delivering CLS timber into Northampton, priced to your postcode and confirmed in writing.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Northampton delivery at a glance

Delivery
Standard mainland delivery
How it arrives
Bundles with your boards
Delivering to
Northampton (Northamptonshire)
Postcode districts
NN1, NN2, NN5, NN4
Nearby (straight line)
Wellingborough (9 mi), Daventry (12 mi), Rushden (12 mi)
Daylight
About 7h 42m on the shortest day

Our CLS timber range for Northampton jobs

  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • Noggins and head platesCut from the same stock.
  • FixingsScrews, nails and frame fixings to suit.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Getting CLS timber onto your Northampton site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Northampton is inside our standard mainland delivery area.

  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
  • On busy streets in Northampton, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
  • Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

How much will you need?

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

CLS Studwork Timber in Northampton: questions

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Is there a minimum order for delivery to Northampton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver CLS timber to a site with restricted access in Northampton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price