CLS Studwork Timber delivered across Lincolnshire

Choosing from our CLS timber range

• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.

CLS Studwork Timber delivered in Lincolnshire towns

• CLS Studwork Timber in Lincoln
• CLS Studwork Timber in Grimsby
• CLS Studwork Timber in Scunthorpe
• CLS Studwork Timber in Boston
• CLS Studwork Timber in Grantham
• CLS Studwork Timber in Cleethorpes
• CLS Studwork Timber in Spalding
• CLS Studwork Timber in Skegness
• CLS Studwork Timber in Stamford
• CLS Studwork Timber in Gainsborough

Sizing your order

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivery to Lincolnshire: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Lincolnshire.

• If neighbours share the access, it helps to let them know a lorry is coming.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Picking the right product

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

CLS Studwork Timber questions

Is there a minimum order for delivery to Lincolnshire?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver CLS timber to a site with restricted access in Lincolnshire?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.