CLS Studwork Timber delivery in Gainsborough

CLS Studwork Timber available for Gainsborough delivery

• FixingsScrews, nails and frame fixings to suit.
• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

A quick quantity check

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Getting CLS timber onto your Gainsborough site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Gainsborough is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

CLS Studwork Timber: choosing well

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

CLS Studwork Timber in Gainsborough: questions

Can you deliver CLS timber to a site with restricted access in Gainsborough?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver CLS timber to Gainsborough?

Yes. We deliver across Gainsborough, including DN21. Gainsborough is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.