Timber & Sheets
CLS Studwork Timber delivered to Kirkby
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Kirkby, from a single pallet for a small job to full loads for bigger builds.
CLS Studwork Timber to Kirkby: the basics
- Delivering to
- Kirkby, Merseyside
- Daylight
- About 7h 28m on the shortest day
- Postcode districts
- L32, L33, L34, L11
- How it arrives
- Bundles with your boards
- Nearby (straight line)
- Maghull (3 mi), Litherland (4 mi), Prescot (5 mi)
- Delivery
- Standard mainland delivery
Choosing from our CLS timber range
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- FixingsScrews, nails and frame fixings to suit.
- Noggins and head platesCut from the same stock.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
Delivery to Kirkby: what helps
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Kirkby is inside our standard mainland delivery area.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
Getting the right CLS timber
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Working out quantities for your Kirkby job
A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
CLS Studwork Timber in Kirkby: questions
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Can you deliver CLS timber to a site with restricted access in Kirkby?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Can I add other materials to my Kirkby delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
CLS Studwork Timber in neighbouring towns
- CLS Studwork Timber in Maghull
- CLS Studwork Timber in Litherland
- CLS Studwork Timber in Prescot
- CLS Studwork Timber in Bootle
- CLS Studwork Timber in Huyton
- CLS Studwork Timber in Ormskirk
Also available in Kirkby
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.