Order CLS timber for delivery in Ormskirk

What CLS timber can we deliver to Ormskirk?

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• FixingsScrews, nails and frame fixings to suit.
• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Quantities: a worked example

A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

How delivery works in Ormskirk

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Ormskirk is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• On busy streets in Ormskirk, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

CLS Studwork Timber: choosing well

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

CLS Studwork Timber in Ormskirk: questions

Can you deliver CLS timber to a site with restricted access in Ormskirk?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

Do you deliver CLS timber to trades and homeowners in Ormskirk?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.