Timber & Sheets
Order CLS timber for delivery in Hyde
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Whether it is a repair, an extension or a new build in Hyde, we can supply the CLS timber and deliver to site.
CLS Studwork Timber to Hyde: the basics
- How it arrives
- Bundles with your boards
- Delivering to
- Hyde, Greater Manchester
- Postcode districts
- SK14, M34, SK16
- Daylight
- About 7h 29m on the shortest day
- Nearby (straight line)
- Denton (2 mi), Dukinfield (2 mi), Stalybridge (2 mi)
- Delivery
- Standard mainland delivery
What CLS timber can we deliver to Hyde?
- Noggins and head platesCut from the same stock.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- FixingsScrews, nails and frame fixings to suit.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
How delivery works in Hyde
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Hyde is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- On busy streets in Hyde, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
Getting the right CLS timber
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Quantities: a worked example
A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Questions about CLS timber delivery in Hyde
What does CLS stand for?
Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.
Do you deliver CLS timber to Hyde?
Yes. We deliver across Hyde, including SK14, M34, SK16. Hyde is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Is there a minimum order for delivery to Hyde?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
CLS Studwork Timber near Hyde
- CLS Studwork Timber in Denton
- CLS Studwork Timber in Dukinfield
- CLS Studwork Timber in Stalybridge
- CLS Studwork Timber in Ashton-under-Lyne
- CLS Studwork Timber in Droylsden
- CLS Studwork Timber in Stockport
Add to your Hyde delivery
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.