Timber & Sheets
Order CLS timber for delivery in Droylsden
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
SK Trade is a builders' merchant delivering CLS timber into Droylsden, priced to your postcode and confirmed in writing.

CLS Studwork Timber to Droylsden: the basics
- Nearby (straight line)
- Failsworth (2 mi), Denton (2 mi), Ashton-under-Lyne (2 mi)
- How it arrives
- Bundles with your boards
- Daylight
- About 7h 28m on the shortest day
- Postcode districts
- M43, M18, M11, M35
- Delivering to
- Droylsden, Greater Manchester
- Delivery
- Standard mainland delivery
Which CLS timber can you order in Droylsden?
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- FixingsScrews, nails and frame fixings to suit.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
Getting the right CLS timber
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Sizing your order
A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Getting CLS timber onto your Droylsden site
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Droylsden is inside our standard mainland delivery area.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- On busy streets in Droylsden, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
Common questions from Droylsden
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Can you deliver CLS timber to a site with restricted access in Droylsden?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Do you deliver CLS timber to Droylsden?
Yes. We deliver across Droylsden, including M43, M18, M11, M35. Droylsden is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Close to Droylsden
- CLS Studwork Timber in Failsworth
- CLS Studwork Timber in Denton
- CLS Studwork Timber in Ashton-under-Lyne
- CLS Studwork Timber in Dukinfield
- CLS Studwork Timber in Hyde
- CLS Studwork Timber in Stalybridge
Also available in Droylsden
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
