CLS Studwork Timber delivered to Hornchurch

What CLS timber can we deliver to Hornchurch?

• Noggins and head platesCut from the same stock.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Delivering CLS timber in Hornchurch

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Hornchurch is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• If neighbours share the access, it helps to let them know a lorry is coming.
• On busy streets in Hornchurch, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Before you order CLS timber

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Estimating your CLS timber

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Questions about CLS timber delivery in Hornchurch

Do you deliver CLS timber to trades and homeowners in Hornchurch?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can you deliver CLS timber to a site with restricted access in Hornchurch?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.