OSB, MDF & Chipboard delivery in Hornchurch

Which OSB, MDF and chipboard can you order in Hornchurch?

• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.

Delivery to Hornchurch: what helps

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Hornchurch is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• On busy streets in Hornchurch, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

A quick quantity check

Decking 30 m² with 2440 × 1220 mm sheets takes 12 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 23 boards.

Before you order OSB, MDF and chipboard

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Common questions from Hornchurch

Can I add other materials to my Hornchurch delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Hornchurch?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.