CLS Studwork Timber delivered to Thamesmead

CLS Studwork Timber available for Thamesmead delivery

• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Delivery to Thamesmead: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Thamesmead is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

How much will you need?

A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Before you order CLS timber

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

CLS Studwork Timber questions

Do you deliver CLS timber to trades and homeowners in Thamesmead?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Do you deliver CLS timber to Thamesmead?

Yes. We deliver across Thamesmead, including SE28, SE2, DA17, SE18. Thamesmead is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.