CLS Studwork Timber for sites in Herefordshire

CLS Studwork Timber we supply in Herefordshire

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.
• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

CLS Studwork Timber delivered in Herefordshire towns

• CLS Studwork Timber in Hereford
• CLS Studwork Timber in Leominster
• CLS Studwork Timber in Ross-on-Wye
• CLS Studwork Timber in Ledbury

Estimating your CLS timber

A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivering CLS timber in Herefordshire

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Herefordshire.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• On busy streets in Herefordshire, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Getting the right CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Common questions from Herefordshire

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can I add other materials to my Herefordshire delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to Herefordshire?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.