Order CLS timber for delivery in Hastings

CLS Studwork Timber we supply in Hastings

• Noggins and head platesCut from the same stock.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Picking the right product

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Getting CLS timber onto your Hastings site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Hastings is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• On busy streets in Hastings, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

A quick quantity check

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Ordering CLS timber for Hastings: FAQs

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Can you deliver CLS timber to a site with restricted access in Hastings?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Hastings delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.