Timber & Sheets
CLS Studwork Timber for Hailsham, delivered to site
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Hailsham, from a single pallet for a small job to full loads for bigger builds.
Hailsham delivery at a glance
- Daylight
- About 7h 56m on the shortest day
- Nearby (straight line)
- Eastbourne (7 mi), Seaford (9 mi), Bexhill-on-Sea (9 mi)
- Delivery
- Standard mainland delivery
- Delivering to
- Hailsham, East Sussex
- How it arrives
- Bundles with your boards
- Postcode districts
- BN27
Which CLS timber can you order in Hailsham?
- FixingsScrews, nails and frame fixings to suit.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
Working out quantities for your Hailsham job
A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Things to check before you order
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Before your Hailsham delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Hailsham is inside our standard mainland delivery area.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
- With roughly 7h 56m of daylight in Hailsham around the shortest day, morning deliveries leave more working light for the job.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
CLS Studwork Timber questions
Can you deliver CLS timber to a site with restricted access in Hailsham?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Do you deliver CLS timber to trades and homeowners in Hailsham?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Other towns near Hailsham
- CLS Studwork Timber in Eastbourne
- CLS Studwork Timber in Seaford
- CLS Studwork Timber in Bexhill-on-Sea
- CLS Studwork Timber in Hastings
- CLS Studwork Timber in Rottingdean
- CLS Studwork Timber in Crowborough
More from SK Trade in Hailsham
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.