CLS Studwork Timber for Gerrards Cross, delivered to site

CLS Studwork Timber available for Gerrards Cross delivery

• FixingsScrews, nails and frame fixings to suit.
• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Getting the right CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Getting CLS timber onto your Gerrards Cross site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Gerrards Cross is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• On busy streets in Gerrards Cross, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Sizing your order

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Ordering CLS timber for Gerrards Cross: FAQs

Do you deliver CLS timber to Gerrards Cross?

Yes. We deliver across Gerrards Cross, including SL9, SL3, SL2, HP9. Gerrards Cross is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Can you deliver CLS timber to a site with restricted access in Gerrards Cross?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.