Timber & Sheets
Order CLS timber for delivery in Chalfont St Peter
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Whether it is a repair, an extension or a new build in Chalfont St Peter, we can supply the CLS timber and deliver to site.
Delivery facts for Chalfont St Peter
- Delivering to
- Chalfont St Peter, Buckinghamshire
- Daylight
- About 7h 48m on the shortest day
- Nearby (straight line)
- Gerrards Cross (2 mi), Rickmansworth (4 mi), Amersham (5 mi)
- How it arrives
- Bundles with your boards
- Postcode districts
- SL9, HP9, HP8
- Delivery
- Standard mainland delivery
CLS Studwork Timber we supply in Chalfont St Peter
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Choosing CLS timber
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
How delivery works in Chalfont St Peter
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Chalfont St Peter is inside our standard mainland delivery area.
- On busy streets in Chalfont St Peter, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- Give us the full postcode for the drop point; deliveries around SL9 are priced to the exact address.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
How much will you need?
A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Questions about CLS timber delivery in Chalfont St Peter
Can you deliver CLS timber to a site with restricted access in Chalfont St Peter?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Can I add other materials to my Chalfont St Peter delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Also delivering CLS timber nearby
- CLS Studwork Timber in Gerrards Cross
- CLS Studwork Timber in Rickmansworth
- CLS Studwork Timber in Amersham
- CLS Studwork Timber in Uxbridge
- CLS Studwork Timber in Ruislip
- CLS Studwork Timber in Chesham
Complete your Chalfont St Peter order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.