CLS Studwork Timber for Ruislip, delivered to site

Our CLS timber range for Ruislip jobs

• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Getting the right CLS timber

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Planning the drop in Ruislip

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Ruislip is inside our standard mainland delivery area.

• In summer Ruislip gets around 16h 39m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Give us the full postcode for the drop point; deliveries around HA4 are priced to the exact address.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Sizing your order

A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Your questions answered

Can you deliver CLS timber to a site with restricted access in Ruislip?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Ruislip?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.