CLS Studwork Timber delivery in Bentley

Our CLS timber range for Bentley jobs

• Noggins and head platesCut from the same stock.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• FixingsScrews, nails and frame fixings to suit.

Getting the right CLS timber

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

How delivery works in Bentley

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Bentley is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Estimating your CLS timber

A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Common questions from Bentley

Can you deliver CLS timber to a site with restricted access in Bentley?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can I add other materials to my Bentley delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.