Timber & Sheets
CLS Studwork Timber for Frome, delivered to site
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Frome, from a single pallet for a small job to full loads for bigger builds.
CLS Studwork Timber to Frome: the basics
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 52m on the shortest day
- Delivering to
- Frome, Somerset
- How it arrives
- Bundles with your boards
- Postcode districts
- BA11
- Nearby (straight line)
- Trowbridge (8 mi), Bath (10 mi), Kingswood (17 mi)
Which CLS timber can you order in Frome?
- FixingsScrews, nails and frame fixings to suit.
- Noggins and head platesCut from the same stock.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
Delivery to Frome: what helps
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Frome is inside our standard mainland delivery area.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- In summer Frome gets around 16h 35m of daylight, but early deliveries still beat the traffic and give the longest working day.
A quick quantity check
A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Picking the right product
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Your questions answered
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Do you deliver CLS timber to trades and homeowners in Frome?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Can you deliver CLS timber to a site with restricted access in Frome?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
CLS Studwork Timber in neighbouring towns
- CLS Studwork Timber in Trowbridge
- CLS Studwork Timber in Bath
- CLS Studwork Timber in Kingswood
- CLS Studwork Timber in Chippenham
- CLS Studwork Timber in Mangotsfield
- CLS Studwork Timber in Bristol
Other materials for Frome sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.