SK Trade, sktrade.co.uk

Building Materials

Damp Proofing & Membranes delivery in Frome

Damp proofing materials stop moisture rising or passing through a building: a damp-proof course (DPC) in the walls and a damp-proof membrane (DPM) under the floor.

SK Trade prices damp proofing delivered to Frome and the rest of Somerset, so the cost and the delivery date are agreed before anything is loaded.

Rolls of black damp-proof course and a folded damp-proof membrane on a floor slab

Your Frome delivery

Daylight
About 7h 52m on the shortest day
How it arrives
Rolls with a mixed load
Postcode districts
BA11
Delivery
Standard mainland delivery
Delivering to
Frome, Somerset
Nearby (straight line)
Trowbridge (8 mi), Bath (10 mi), Kingswood (17 mi)

Damp Proofing & Membranes we supply in Frome

  • Liquid DPM and tankingCoatings for screeds and below-ground walls.
  • Cavity trays and stop endsTo direct water out of the cavity over openings.
  • Radon barriersGas-resistant membranes for areas that need radon protection.
  • DPM sheetingHeavy-gauge polythene membrane under concrete floors.
  • Weep ventsFor drainage and ventilation at the base of cavities and over trays.

Damp Proofing & Membranes: choosing well

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Sizing your order

An extension in Frome with 16 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 15 m² floor slab needs about 17.2 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Planning the drop in Frome

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Frome is inside our standard mainland delivery area.

  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
  • Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
  • Give us the full postcode for the drop point; deliveries around BA11 are priced to the exact address.

Damp Proofing & Membranes questions

Can I add other materials to my Frome delivery?

Yes. Put everything on one list, from damp proofing to fixings and PPE, and we will price it as one delivery where the products can travel together.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Where does the DPC go?

Usually at least 150 mm above outside ground level, linked to the floor DPM.

Can you deliver damp proofing to a site with restricted access in Frome?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price