Timber & Sheets
CLS Studwork Timber for East Kilbride, delivered to site
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across East Kilbride, from a single pallet for a small job to full loads for bigger builds.
Your East Kilbride delivery
- Daylight
- About 7h 00m on the shortest day
- Postcode districts
- G74, G75, G72
- Nearby (straight line)
- Cambuslang (3 mi), Rutherglen (5 mi), Hamilton (6 mi)
- Delivery
- Standard mainland delivery
- How it arrives
- Bundles with your boards
- Delivering to
- East Kilbride, Lanarkshire
CLS Studwork Timber available for East Kilbride delivery
- FixingsScrews, nails and frame fixings to suit.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
How much will you need?
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Getting CLS timber onto your East Kilbride site
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. East Kilbride is inside our standard mainland delivery area.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
Things to check before you order
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
CLS Studwork Timber in East Kilbride: questions
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Do you deliver CLS timber to trades and homeowners in East Kilbride?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Do you deliver CLS timber to East Kilbride?
Yes. We deliver across East Kilbride, including G74, G75, G72. East Kilbride is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Close to East Kilbride
- CLS Studwork Timber in Cambuslang
- CLS Studwork Timber in Rutherglen
- CLS Studwork Timber in Hamilton
- CLS Studwork Timber in Newton Mearns
- CLS Studwork Timber in Motherwell
- CLS Studwork Timber in Glasgow
More materials delivered to East Kilbride
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.