CLS Studwork Timber delivery in Aberystwyth

What CLS timber can we deliver to Aberystwyth?

• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Picking the right product

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Planning the drop in Aberystwyth

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Aberystwyth is inside our standard mainland delivery area.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• On busy streets in Aberystwyth, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Estimating your CLS timber

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

CLS Studwork Timber in Aberystwyth: questions

Can I add other materials to my Aberystwyth delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Do you deliver CLS timber to Aberystwyth?

Yes. We deliver across Aberystwyth, including SY23, SY24. Aberystwyth is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.