Timber & Sheets
CLS Studwork Timber for Chichester, delivered to site
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Trades and homeowners in Chichester can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

Delivery facts for Chichester
- Delivery
- Standard mainland delivery
- Delivering to
- Chichester, West Sussex
- Daylight
- About 7h 56m on the shortest day
- How it arrives
- Bundles with your boards
- Postcode districts
- PO19, PO20, PO18
- Nearby (straight line)
- Bognor Regis (6 mi), Havant (9 mi), Littlehampton (11 mi)
Which CLS timber can you order in Chichester?
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
Getting CLS timber onto your Chichester site
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Chichester is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- If neighbours share the access, it helps to let them know a lorry is coming.
- With roughly 7h 56m of daylight in Chichester around the shortest day, morning deliveries leave more working light for the job.
Sizing your order
A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Before you order CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Questions about CLS timber delivery in Chichester
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Do you deliver CLS timber to trades and homeowners in Chichester?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Is there a minimum order for delivery to Chichester?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Nearby towns we deliver CLS timber to
- CLS Studwork Timber in Bognor Regis
- CLS Studwork Timber in Havant
- CLS Studwork Timber in Littlehampton
- CLS Studwork Timber in Waterlooville
- CLS Studwork Timber in Portsmouth
- CLS Studwork Timber in Gosport
Complete your Chichester order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
