CLS Studwork Timber delivery in Bognor Regis

CLS Studwork Timber available for Bognor Regis delivery

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• Noggins and head platesCut from the same stock.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Choosing CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Planning the drop in Bognor Regis

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Bognor Regis is inside our standard mainland delivery area.

• In summer Bognor Regis gets around 16h 30m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Give us the full postcode for the drop point; deliveries around PO21 are priced to the exact address.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Estimating your CLS timber

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Questions about CLS timber delivery in Bognor Regis

Do you deliver CLS timber to Bognor Regis?

Yes. We deliver across Bognor Regis, including PO21, PO22, PO20. Bognor Regis is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can you deliver CLS timber to a site with restricted access in Bognor Regis?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.