MOT Type 1 Sub-base delivery in Burton upon Trent

MOT Type 1 Sub-base we supply in Burton upon Trent

• ScalpingsCheaper granular fill for less demanding areas.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• HardcoreBroken masonry fill for bulking up ground.

Estimating your MOT Type 1

A 6 × 3 m area at 100 mm compacted is 1.8 m³. At about 2.1 tonnes per cubic metre plus 10% that is 4.2 tonnes, or around 5 bulk bags. Try the sub-base calculator

Getting MOT Type 1 onto your Burton upon Trent site

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Burton upon Trent is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Getting the right MOT Type 1

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Your questions answered

Can I add other materials to my Burton upon Trent delivery?

Yes. Put everything on one list, from MOT Type 1 to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver MOT Type 1 to a site with restricted access in Burton upon Trent?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.

How deep should a driveway sub-base be?

Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.