SK Trade, sktrade.co.uk

Building Materials

Order bricks for delivery in Scone

Bricks are fired clay or concrete masonry units; the UK standard size is 215 × 102.5 × 65 mm, which lays at about 60 bricks per square metre of single-skin wall.

Trades and homeowners in Scone can order bricks for delivery by sending a list, a drawing or just the sizes of the job.

Shrink-wrapped pallets of red and buff facing bricks on a building site

Delivery facts for Scone

Daylight
About 6h 51m on the shortest day
How it arrives
Strapped packs, usually crane offload
Delivering to
Scone (Perth and Kinross)
Nearby (straight line)
Perth (2 mi), Blairgowrie (12 mi), Auchterarder (14 mi)
Delivery
Standard mainland delivery
Postcode districts
PH2, PH1

What bricks can we deliver to Scone?

  • Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.
  • Facing bricksWirecut, stock and handmade-style faces in reds, buffs, greys and multis for the outside skin.
  • Concrete bricksConsistent concrete units in standard and coloured finishes, useful for below-ground work.
  • Special shapesBullnose, cant, coping and plinth bricks to finish sills, piers and wall tops.

Planning the drop in Scone

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Scone is inside our standard mainland delivery area.

  • In summer Scone gets around 17h 44m of daylight, but early deliveries still beat the traffic and give the longest working day.
  • Give us the full postcode for the drop point; deliveries around PH2 are priced to the exact address.
  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Sizing your order

Take a garden wall in Scone 4 m long and 2.1 m high: 8.4 m². At 60 bricks per square metre plus 5% for cuts that is 530 bricks, roughly 2 packs of 500 depending on the maker, laid in about 0.5 tonnes of building sand and 5 bags of cement at a 1:4 mix. Try the brick calculator

Before you order bricks

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or the council's building standards service may specify one.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Your questions answered

Do you deliver bricks to Scone?

Yes. We deliver across Scone, including PH2, PH1. Scone is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How much mortar do 1,000 bricks need?

Roughly half a cubic metre of mixed mortar, which is about 1 tonne of building sand and 8 to 9 bags of cement at a 1:4 mix. Our brick calculator works it out for your wall.

Can you deliver bricks to a site with restricted access in Scone?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Which bricks go below the damp-proof course?

Below DPC you need bricks that cope with constant damp and frost: engineering bricks, or clay facings declared F2 and S2. Concrete bricks are another option for below-ground work.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price